Skip to content

Manufacturing

Analysis

India’s SEZ Duty Rules Make Imports Cheaper Than Domestic Ferrochrome

India’s current SEZ-to-DTA customs rules tax domestically manufactured goods as imports—even when they use imported inputs—creating a cost disadvantage versus ferrochrome imported under PTAs. TUF’s Low Carbon Ferro Chrome (tariff item 72024900) is excluded from the temporary concessional-duty window running from April 1, 2026 to March 31, 2027. Experts argue for extending the duty-recovery model used in EOUs and MOOWR schemes to SEZs. Prof. Rajesh Babu Ravindran of IIM Calcutta stresses urgency: "the issue is worth fixing before the furnace goes cold, not after."

Original source: forbesindia.com

India’s SEZ Duty Rules Make Imports Cheaper Than Domestic Ferrochrome

Ask SCI.AI about this story

📋 本文要点

India’s current SEZ-to-DTA customs rules tax domestically manufactured goods as imports—even when they use imported inputs—creating a cost disadvantage versus ferrochrome imported under PTAs. TUF’s Low Carbon Ferro Chrome (tariff item 72024900) is excluded from the temporary concessional-duty window running from April 1, 2026 to March 31, 2027. Experts argue for extending the duty-recovery model used in EOUs and MOOWR schemes to SEZs. Prof. Rajesh Babu Ravindran of IIM Calcutta stresses urgency: "the issue is worth fixing before the furnace goes cold, not after."

According to www.forbesindia.com, India’s current customs treatment of goods cleared from Special Economic Zones (SEZs) into the Domestic Tariff Area (DTA) creates a cost disadvantage for domestically manufactured ferrochrome—making imported ferrochrome cheaper than Indian-made equivalents.

Policy Fragmentation Undermines ‘Make in India’

Individual trade policies—such as duty-free imports of inputs and capital goods for SEZ units, or zero-duty concessions under the Oman Comprehensive Economic Partnership Agreement (CEPA)—are defensible in isolation. However, their cumulative effect, as demonstrated by the TUF case, incentivizes relocating manufacturing activity that India is fully capable of undertaking domestically—directly contradicting the objectives of Make in India and Atmanirbhar Bharat.

The problem lies not in any single measure, but in the lack of integrated evaluation. For example, SEZ units selling into India are taxed as if their products were imports—even though domestic labour, power, and manufacturing processes contribute significantly to value addition. Meanwhile, identical ferrochrome imported under preferential trade agreements faces lower effective duties.

This misalignment is especially acute for TUF’s Low Carbon Ferro Chrome, classified under tariff item 72024900. The product does not fall under the scope of Notification No. 11/2026-Customs dated March 31, 2026, which introduced a temporary concessional-duty window for certain SEZ-to-DTA clearances.

A Targeted Duty-Recovery Mechanism

A durable solution does not require scrapping the Oman CEPA or abandoning SEZs’ export orientation. Instead, it calls for extending an existing principle—already applied under the Export Oriented Undertakings (EOUs) and MOOWR (Manufacturing and Other Operations in Warehouse) schemes—to SEZs. Under those schemes, customs duty foregone on imported inputs is recovered only upon domestic sale—not levied anew on the finished product’s full value.

India already implements this targeted recovery mechanism for EOUs and MOOWR units. There appears to be no significant administrative obstacle to applying the same logic to SEZ clearances into the DTA. The government has taken a limited, time-bound step in this direction: the concessional-duty window applies only between April 1, 2026 and March 31, 2027.

As Prof. Rajesh Babu Ravindran, Professor of Law and Public Policy at IIM Calcutta, notes:

“Where the answer is yes [that imports are cheaper than domestic manufacturing], as it currently is for ferrochrome, the issue is worth fixing before the furnace goes cold, not after.” — Prof. Rajesh Babu Ravindran, Professor of Law and Public Policy at IIM Calcutta

Level Playing Field for SEZ-Produced Goods

A more fundamental reform would ensure that goods manufactured in Indian SEZs entering the DTA receive duty treatment comparable to identical products imported under India’s Preferential Trade Agreements (PTAs), subject to appropriate safeguards. This would eliminate the current penalty on domestic value addition and strengthen India’s manufacturing competitiveness.

India is negotiating and signing free trade and preferential trade agreements at a faster pace than at any point in its history. Yet new tariff concessions are layered onto an existing framework of domestic exemptions, SEZ regulations, and customs rules—without sufficient scrutiny of their combined impact.

The core test for future agreements must be consistent: Do newly negotiated tariff concessions, when combined with existing rules, make it cheaper to import a finished product than to manufacture it in India or an Indian SEZ? For ferrochrome, the answer today is yes—and the policy gap requires correction before structural damage deepens.

Source: forbesindia.com

Compiled from international media by the SCI.AI editorial team.

Ask SCI.AI Finished reading? Continue with SCI.AI. Explore the related policy, route, company and historical context. Continue asking
Stay ahead of supply chain shifts

One email a week: the stories that matter and new risk events — in English, free.

Prefer RSS? Articles Risk events

Top 10 carriers control 85% of container capacity as MSC hits 21.5%
Manufacturing

Top 10 carriers control 85% of container capacity as MSC hits 21.5%

The ten largest container lines now control around 85% of global containership capacity, and the top five alone hold 65.5%, according to an Alphaliner ranking dated 10 November 2026. MSC leads with 1,023 ships and 7.48 million TEU, a 21.5% share that puts it roughly 2.77 million TEU ahead of Maersk. The global orderbook has topped 15.12 million TEU, almost 44% of the existing fleet, with MSC alone ordering 182 ships worth 3.38 million TEU. Drewry expects fleet capacity to grow 8.8% in 2027, 12.1% in 2028 and 10% in 2029.

Wing to invest $125M in Texas drone manufacturing plant
Manufacturing

Wing to invest $125M in Texas drone manufacturing plant

Wing plans to invest $125 million in a Texas drone manufacturing plant capable of producing tens of thousands of aircraft annually, as it targets nearly 20 U.S. markets next year and delivery access for more than 40 million people through its Walmart partnership. The company, which operates from over 70 sites and has completed more than 1 million residential deliveries, is also partnering with KDDI to launch service in Japan by the end of 2027, while awaiting FAA beyond-visual-line-of-sight rules that could unlock broader expansion.

Path Robotics raises $300M at $2.45B for factory AI
Manufacturing

Path Robotics raises $300M at $2.45B for factory AI

Path Robotics has raised $300 million in Series E financing at a $2.45 billion post-money valuation, led by growth equity firm Georgian, as the physical AI developer scales beyond welding into new manufacturing tasks and robotic form factors. Annual recurring revenue grew 17-fold in 18 months, the company says, with customers including HII, Lockheed Martin and Saronic, and a $600 million production agreement with HII for US Navy shipbuilding. Path has grown headcount 97 percent year-over-year and plans to reach 400 employees by year-end.

Welcome Back!

Login to your account below

Create New Account!

Fill the forms below to register

Retrieve your password

Please enter your username or email address to reset your password.

Scan to share via WeChat

Open WeChat and scan the QR code to share

QR Code

Add New Playlist